Scania Scania R500 (HMF 5020 with Jib 6+5) + Emtech semi

Harga tidak termasuk VAT
1,428,776 MYR
3,300,000 NOK
Harga tidak termasuk VAT
1,428,776 MYR
3,300,000 NOK

BASIC INFORMATION

Kumpulan produkTrak kren
Jenama / modelScania Scania R500 (HMF 5020 with Jib 6+5) + Emtech semi
Tahun pembuatan2017
Bacaan meter202,000 km
Lokasi mesin2032 Maura
Negara
ID MascusFE273BD3

HARGA

Pilih mata wang
Harga tidak termasuk VAT1,428,776 MYR  (3,300,000 NOK)
VAT
Harga tidak termasuk VAT-

BUTIRAN

Jenis kuasaDiesel
Tahun pendaftaran2018
Sejarah penggunaan penuhYa
Pemeriksaan terakhir2023-05-23
Gred umum (1-5)
Konfigurasi gandar6x2
Nombor pendaftaranKJ36619 + JP3125
Kelas pelepasanEuro 6
Jenis suspensionParabolik-angin
KabinRuang tidur pemandu tinggi
Pembuat krenHMF 5020 K6 + K5
MemanduSebelah kiri
Output enjin368 kW (500 hp)
Anjakan enjin127,000
cm3
Engine ManufacturerScania
TransmisiOptiCruise
Tayar depan / baki bahagian bawah kenderaan95 %
Jumlah tayar belakang99 %
WarnaRød
Body optionsCrane, Air conditioning, Stereo, Cruise control, Cabin suspension - air, Electrical mirrors, Driver seat air-cushioned, Co-driver seat air-cushioned, Heated seats, Single bunk, Beg udara, Immobiliser, Refrigerator, Adjustable steering wheel, Roof hatch, Headlights washer, Fog lights, Emergency triangle, Differential lock, PTO, Exhaust brake, Aluminium wheels, Winter tyres, ABS, EBS, Disc brakes, Heater
LampiranIt can possibly be sold with rotator with 2T stone/thimber grapple and a 2T hydraulic hook. + a couple of manual hooks. Price is for the full set (crane-tractor + semitrailer). No VAT. I have some lifting-equipment like adjustable spreaderbeam solutions, adjustable pallet fork (2T), 10T crane weight (with remote), 10x containerlocks (LAXO), aluminium stanchions (12x double), and some other equipment and securing straps than can be a part of the deal. It all depends on the sale price.

Manual boat support x4 comes with the deal. And wide load extensions with lights and 2x rams (one has hardly been used for the semitrailer. There's also driving ramps (2x) to drive up to the neck from the main bed, and some low (almost as new) bed frames for the neck.
Maklumat lainIn short a well maintained crane truck tractor (low hours on crane) and a newer (2019; registered new in 2020) Emtech semitrailer with remote controlled Tridec steering on axle 2 and 3. Tires on semi-axle 2-3 is ok, but probably will last maximum 2 more years (depending on your usage). Axle 1 on semi is hardly used, so that might "last forever".

New tires on tractor axle 2-3 before this winter (23/24). Lots of usage in them. Studded winter tires in front (used 2 winters; hardly any studs missing). Hard rubber front tires for summer (only one summer of use and has the winter symbol, but is not advisable to use in the winter; they are slightly slippery in corners on wet surface even in summer). All tires on tractor are of the hardest compound available in order to save on fuel/tires. Axle 2-3 tires have worked well this winter. TireChains are of the heavy duty type! (8-9 for truck and trailer in total.)

10T front axle on tractor. Which is 730cm long and 410cm tall/high. Standard 255cm on both truck and semi. 11m total bed space on semi, with 5m extraction possible. About 16m in total. 19-20T load capasity with 50T total weight.

Crane length is rougly 29m. You can handle about 8T close to the truck without the jib. Count roughly 3000h on PTO and roughly 1000h active usage in about 6 years of use (there's a stupid difference between hours from Scania PTO and HMF PTO readings... HMF haven't responded to question about why that is...).

Tractor is on the Scania Silver service plan. Extended with 2 years (from the 5 regular years). It's still on factory brakes. And you should be able to drive 6 more years before changing, if you plan your driving well.

I'm selling because of health issues. Please do give me bids. It will sell to the first sensible bid from the buyer that also can come up with the money to match their bid.

Pick and drop from Oslo Gardermoen airport is possible if you want to come and have a look at it. It's a very short drive for me... Status 4 is set on the set as it is used, but not abused. Minor scuffs/marks. New paintent left front bumper corner comes with the tractor + some various parts. Front light plate (for wide load signs and company name etc) does only light up half. 8 work lights on semi that can be controlled in sets of 4 and 4 from the truck. No VAT on used tractor/semi.
OMARS KRANBIL AS
  • +47 ...TUNJUK
    Sila nyatakan nama MASCUS apabila anda menghubungi penjual
Send e-mail

Nama Penjual

  • OMAR BRAGSTAD

    OMARS KRANBIL AS
    • +47 ...TUNJUK
      Sila nyatakan nama MASCUS apabila anda menghubungi penjual
    • Stensetgutua 2, 2032 Maura, Norway

Syarikat

OMARS KRANBIL AS

Jenama berkaitan
JenamaBilangan iklan
Mercedes-Benz9338
Volvo5831
MAN5273
Scania4708
Renault3974

Butiran - Jenis kuasa: Diesel, Tempoh penggunaan: 7,900 h, Tahun pendaftaran: 2018, Sejarah penggunaan penuh: Ya, Pemeriksaan terakhir: 2023-05-23, Gred umum (1-5): 4, Konfigurasi gandar: 6x2, Bacaan meter: 202,000 km, Nombor pendaftaran: KJ36619 + JP3125, Kelas pelepasan: Euro 6, Jenis suspension: Parabolik-angin, Kabin: Ruang tidur pemandu tinggi, Pembuat kren: HMF 5020 K6 + K5, Memandu: Sebelah kiri, Output enjin: 368 kW (500 hp), Anjakan enjin: 127,000 cm3, Engine Manufacturer: Scania, Transmisi: OptiCruise, Tayar depan / baki bahagian bawah kenderaan: 95 %, Jumlah tayar belakang: 99 %, Warna: Rød, Body options: Crane, Air conditioning, Stereo, Cruise control, Cabin suspension - air, Electrical mirrors, Driver seat air-cushioned, Co-driver seat air-cushioned, Heated seats, Single bunk, Beg udara, Immobiliser, Refrigerator, Adjustable steering wheel, Roof hatch, Headlights washer, Fog lights, Emergency triangle, Differential lock, PTO, Exhaust brake, Aluminium wheels, Winter tyres, ABS, EBS, Disc brakes, Heater